• <span id="5505w"></span>
    <acronym id="5505w"><blockquote id="5505w"></blockquote></acronym>
    亚洲日韩精品一区二区三区,日韩人妻无码精品二专区,国产精品国产三级国产试看,国产成人无码精品久久二区三区
    您好,歡迎光臨萊州聚峰機械有限公司網站! 主營自動攪拌車,攪拌一體車,自動上料攪拌車等各種規格的產品。

    自動上料攪拌車生產廠家

    點擊撥打服務熱線:4008791999

    您的位置:首頁 - 新聞中心 > 公司新聞 >

    攪拌一體車的性能以及液壓原理

    發布時間:2022-11-30 來源:http://www.mayracasales.net/ 瀏覽量:

    概述:攪拌一體車是由二類底盤、傳動系、液壓系統、機架、攪拌罐、進出料裝置、供水系統、操縱系統、人梯等部分構成。那么你知道攪拌一體車的性能
    攪拌一體車是由二類底盤、傳動系、液壓系統、機架、攪拌罐、進出料裝置、供水系統、操縱系統、人梯等部分構成。那么你知道攪拌一體車的性能以及液壓原理是怎樣的嗎?下面小編為您講解。
    The mixer truck is composed of Class II chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, ladder and other parts. Do you know the performance and hydraulic principle of the mixer? The following section explains it for you.
    攪拌一體車的性能
    Performance of mixer truck
    1、采用專用耐磨鋼板制造攪拌筒及葉片。
    1. The mixing drum and blades are made of special wear-resistant steel plates.
    2、攪拌筒葉片制作工藝采用專用模具沖壓成形。
    2. The blade of mixing cylinder is formed by special die stamping.
    3、罐體對接及葉片焊接采用大型回轉式工裝,精度高。
    3. Large rotary tooling is used for tank butt joint and blade welding with high precision.
    4、液壓系統全部采用進口元件,結構緊湊,性能優良。
    4. All hydraulic systems adopt imported components with compact structure and excellent performance.
    5、整車造型別致、美觀,結構緊湊合理。
    5. The whole vehicle has a unique and beautiful design and a compact and reasonable structure.
    6、操作系統靈活方便快捷,實現左右及進料口操作三為一體。
    6. The operating system is flexible, convenient and fast, realizing the integration of left and right and feed inlet operations.
    7、罐體焊后采用噴丸預處理工藝,可實現除銹、防銹。
    7. After welding, the tank body adopts shot blasting pretreatment process, which can realize rust removal and rust prevention.
    攪拌一體車
    攪拌一體車液壓原理
    Hydraulic principle of mixer truck
    當通過操縱裝置使變量桿向左轉動,油泵就開始從油口A排油,經高壓油管進入馬達,馬達轉動,流經馬達的油變成低壓油,經另一高壓油管從B口流回油泵。變量桿轉動角度愈大,油泵每轉排出的油量就愈多,馬達的轉速就愈高。
    When the variable lever is rotated to the left through the control device, the oil pump starts to discharge oil from port A, enters the motor through the high-pressure oil pipe, and the motor rotates. The oil flowing through the motor becomes low-pressure oil, and flows back to the oil pump from port B through another high-pressure oil pipe. The greater the rotation angle of the variable rod, the more oil will be discharged by the oil pump per revolution, and the higher the motor speed.
    當操縱變量稈使其向右轉動,這時壓力油就從B口排出,馬達旋向改變,低壓油從A口流回油泵。馬達的轉動帶動了減速機,從而使攪拌車的拌筒能在一定轉速范圍內無級變速且有兩種旋向。其它液壓系統原理與此相同。
    When the variable stalk is manipulated to rotate to the right, the pressure oil will be discharged from port B, the rotation direction of the motor will change, and the low-pressure oil will flow back to the oil pump from port A. The rotation of the motor drives the reducer, so that the mixing drum of the mixer can continuously change speed within a certain speed range and has two kinds of rotation directions. The principle of other hydraulic systems is the same.
    攪拌一體車的性能以及液壓原理就講解到這里了,您對此有什么問題或者需求都可以網站留言,聯系我們http://www.mayracasales.net,我們會有專門的人員為您解答!
    This is the end of the performance and hydraulic principle of the mixer truck. If you have any questions or needs, please leave a message on the website and contact us http://www.mayracasales.net , we will have special personnel to answer for you!

    截屏,微信識別二維碼

    yyds永远的神亚洲日韩精品一区二区三区楚风他们果断改变位置,来到秦珞音等人的不远处,然后他们发现,日韩人妻无码精品二专区国产精品国产三级国产试看这里有一层又一层,被大梦净土的弟子围着。,楚风提醒,让...